Continue Shopping

MY CART (0)

Cart Subtotal:

$0.00
BuggiesUnlimited; 479;

Curtis 275 Amp 36-48v Controller

 In Stock
Ships Fast
479
$606.99 $1,011.95
You Save: $404.96
WARNING: Cancer & Reproductive Harm - https://www.p65warnings.ca.gov
Review:
 

Product Details

The 36/48-Volt 275-Amp Controller will replace the brain of your golf cart if you will. The controller receives signals from the throttle sensor, activation circuit, and batteries before it sends an alert to the motor; if any of these does not communicate properly, no go. Even a tiny wire getting nicked is enough to make any golf cart controller temperamental.

This is what is called a short body controller. It has four buss bars which are where the big cables hook up. It is programmed for a 5k-0 throttle output meaning this is an excellent choice for 48-volt series powered Club Cars. The output is rated at 275 amps and can run with a current flow of between 36-48 volts. This is a Curtis 1204 footprint if you are trying to replace something exact. The controller measurements are seven inches by five and a half by three. As stated previously, you can use this on higher voltages but not on the lower 24-volt carts. Call Buggies Unlimited now.

Specifications:

  • Short body controller
  • With 4 buss bars and 5k-0 throttle
  • 275 amp, 36-48 volt, Curtis (1204-413) series
  • Controller Measurements-(1204M) 7"x5.5"x3"
Note: Not for use on Club Car / 24-Volt Golf Carts
Item
479  Controller 36-48 275a
OEM
Universal
Model
Universal
Start Year
Universal
End Year
Universal
Gas/Electric
Both

Customer Reviews

2 Ratings
2.5out of 5 stars
2 Ratings

Rated 5 stars by 0% of reviewers

Rated 4 stars by 50% of reviewers

Rated 3 stars by 0% of reviewers

Rated 2 stars by 0% of reviewers

Rated 1 star by 50% of reviewers

Golf Cart
E-Z-GO TXT (1)
2 Reviews
Rated 4 out of 5
Jul 22, 2021
It’s a okay
Rated 1 out of 5
Nov 9, 2018
This controllor was the one recommended by Buggies for the replacement for mine
The controller fit, yes, but it was the wrong amperage so the cart runs way slower than before. Not Happy as I cannot return electrical parts that were installed. Don't think that if you get a recommendation from Buggies people that what you are getting is necessarily what you need. You need to research EVERYTHING yourself to be satisfied. And when they say they are out of stock on a part and give you a recommendation for a different part that will work, be careful, as in this case the part worked but it doesn't perform as well as the original replacement piece would have. Very disappointed and I spend a lot of money with Buggies. I guess I will have to consider E-Bay parts instead.

You may also like...

Questions & Answers

Have a question? Ask owners.Have a question about this? Ask people who own it.
Start typing and see existing answers.
12 Questions
Hi guys I’m looking for a controller for a older ezgo cart with 36 volt system the controller says 36 too 48 volts and the model is 1205 -210 the serial number is 9260-642857. This controller has 123 small push on terminals on the left facing it but also has a small push on terminal on the right top next too the B plus post.It has 4 big posts B minus B plus M minus and A 2 The current on it is 350 Amp.Having a hard time finding this it’s out of a cart called a shuttle.?

Thank you for reaching out! Can you send me a picture of the golf cart? Is the forward and reverse switch on the dash or behind your legs? Is there a Run/tow switch under the seat on the passenger side?

my old controller had 3 legs as its 36 volt but my new controller has 4 do i leave one bare?
I can short out my solenoid and the cart will go. I assume the controller is bad, but I want to make sure prior to spending $500. How can I verify the controller is bad?

Hi David, I'd recommend calling our technicians who can help troubleshoot your golf cart and point you in the right direction.

will this replace my Curtis controller model 1204-410 225 amp?

No sir, it is actually cheaper. Give me a call and we can get the correct one for you. My name is Billy and my direct number is 904/659-9967

Will this work on a 98 DS 48 volt with a silver oem controller??

Hi Jim, Please give our sales team a call toll-free at 1-888-444-9994, and we can assist. We need more information Thank You!

I have a 2004 Columbia par car 48 v will this controller work?

You would need to verify the AMP Rating on the old controller that you are replacing. In other words if the old one is 350 Amp for example, you would need to replace it with a 350 Amp Controller. You also need to confirm what the footprint of the Columbia Cart is. Each Controller for EZ GO has a specific footprint in the controller. The same goes for Club Car and they aren't interchangeable without the footprint being changed. So you would need to know the footprint for the Columbia Par Car controller to find out which controller to use. If you go online and Google the 2004 Par Car and try to find out the footprint and then match it to either EZ GO or Club Car and then match the Amp Rating to what you have in the Par Car. I hope this helps.

I have a 1963 ezgo golf cart, will this controler work?

PROBABLY NOT. YOU NEED TO MAKE SURE ITS EXACTLY THE SAME AS THE ONE YOU ALREADY HAVE BECAUSE AN UPDATED DESIGN WILL NOT WORK CORRECTLY AND GIVE YOU ALL KINDS OF TROUBLE.

Hey there im looking for a controller for my club car ds 48v. The modle on the controller is 1204 410?
I have a EZ go golf cart serial 939966 manuf code is E0396 trying to find the right controller for it ? is a 36 
volt cart I think it is a 300 Amp controller
Hi All, I have a 2004 Columbia Par Car that will not go into forward or reverse, I can hear the solenoids click when the key is turned. any thoughts ?