MY CART (0)
Cart Subtotal:
The E-Z-GO Replacement Headlight from Buggies Unlimited is one of those golf cart parts you never think you will need. Then something unplanned happens, like adverse weather. This is the most common cause of wrecks that we hear about. You did not equip your caddie to handle rain as your car or truck does, and if you are not ready for it, you could wind up in the ditch. Things like this can get easily damaged or cracked when it does happen. You know as well as we do how quickly that can turn into a water-filled nightmare.
One of the most annoying things you can encounter is a kit with no spare components available. For example, when you buy a set of aftermarket lights for your carriage, you do not plan on hitting a low-hanging branch on your way to the tree stand. However, that's what happened. The vendor tells you that the manufacturer seals this kit, and you have to buy the whole thing to get a cracked lens fixed. With some E-Z-GO parts, this is unavoidable. Still, we carry spares and components to make sure you stay in full operation on everything we can.
This golf cart headlight is not hard to install at all. You are working with twelve volts DC. Just a positive and a negative to hook up, and you are on the way. Grab a buddy and order a pizza from the local joint. Youse guys will spend more time eating than working. Never a bad thing.
Buggies Unlimited is an excellent source for everything you need related to golf carts. As a matter of fact, we have it all, from E-Z-GO hard parts to accessories. If you need a solenoid, we have your back. Time for a rear seat? Give us a call. We are only one positive customer service experience away!
Hi Josh, I'm sorry we are unable to get that info.
The above light fit my 2015 ezgo st it comes in a case u remove the case with 2 screws on the back and it mounts into th light socket on golf cart u will have to use the longer screws from original light
Yes it will fit the st350, put screws in from the back of plastic the holes are already their ,and you will have to hardwire the lights in .
I agree with Jackie. The bulb fit my 1999 1200LX after removing the outer case.
Yes that is correct.
It is only 1 light
It is just the lens.
We do not have any screws or brackets for this piece.