When you replace your EZGO leaf springs, getting the needed hardware to install them is imperative. If you try and recycle the old bushings and spacers, you will find them in less than perfect condition. The bushing should be all but gone if the leaf spring is worn out and the spacer is just a small steel tube. Don't you think that over time, with a quarter of the cart's weight bouncing around on it, that it's going to deform a little? You would be right.A good rule of thumb is replacing anything that requires additional parts to install. You should also replenish those extra needed parts. These are the hardware components that help support the golf cart; there would be a considerable sag in your ride without them. The Rear Leaf Spring Spacer installs at the end of the golf cart leaf spring, and it holds two bushings in place. You will need two for every leaf spring you are replacing. Do not wait any longer; pick up the phone and call Buggies Unlimited for a great deal.