This part came very quickly and fit perfectly..it gave my older EZ go a big boost! So happy with this
purchase and the help I got over the phone when ordering!
1994-Up EZGO Medalist-TXT - Curtis 350-AMp Controller
Review:
MY CART (0)
Cart Subtotal:
We wish we could have been there to see your face the first time you opened the controller box. It's always funny to watch the reaction people have when they see how complicated a golf cart's "brain" is for the first time. Rest easy, friend; it's not as bad as it looks. It's never fun to have to replace one of these. However, Buggies Unlimited makes it worry-free with the E-Z-GO Medalist / TXT 350-Amp Curtis Controller. Even though this is an aftermarket unit, it matches the OEM product made by the same company.
This E-Z-GO Medalist / TXT 350-Amp Curtis Controller works for 36 volt systems with the factory ITS harness. That's right, no cutting or splicing required. Your five-wire adaptor will plug right into the face of this product. Leaving it factory takes the distress of putting a wire in the wrong spot and melting something right off the table. This controller will also replace the four busbar units of yore. Get one from Buggies Unlimited today.
Edward i will email it to you
Hi Paul. Yes, this will fit any E-Z-GO TXT model with a Series drive system. If you're unsure about which drive system you have, check two things: Forward and Reverse is a manual lever down by the knees; the controller cover box does not have a Tow/Run Switch.
Yes,it's the only one now available.the four buss type is no longer made.hope this helps
Hi Bobby,
Your older controller will have four posts. The newer controller will not have an A2 post. So that means you must get rid of the A2 cable. You can disconnect the other end from the controller and discard of the cable or keep it for further installations as it won’t be needed with the new controller. Please let me know if their is anything else you need help with. You can request me thru BU as Dylan Brosan.
Chris i emailed it to you
yes it will fit that cart. The wiring is different as there is only 3 terminals not 4.
it should it fit mine. This is a good company. I did a lot of research before I ordered from them. They were very helpful in their suggestions of what I needed. The products arrived quickly.
I unplugged my stock controller and plugged in my new Ezgo 350 Amp controller. No other wiring was needed.
the one i received was new. fit perfect no problems
Hi Mike, if you have the run/tow switch on your controller, that tells us your cart has a DCS system, so we would recommend the Navitas 440 amp controller listed below for your cart.
