1982-Up Club Car Gas - Drive Clutch Mounting Bolt
Review:
MY CART (0)
Cart Subtotal:
The Club Car Drive Clutch Mounting Bolt has an essential job on your caddie. The pulley mounted to your engine is held on by this bolt and a four-letter word known as hope. Thankfully as you tighten the clutch down, it presses onto a tapered crankshaft. This alone will hold the clutch in place, but the bolt acts as a safety. You cannot rely solely on a press fit to keep things in place in a rough application. If you jump your golf cart off a curb, either by accident or on purpose, that jolt alone could be enough to knock things loose. The last thing you want to deal with is a clutch on the ground when trying to showboat a little.
This golf cart bolt is not hard at all to install. It threads right into the outside of the Club Car clutch. You may need to jack your cart up to get the frame out of the way so you can get this accomplished. That is going to be the most challenging part. Call Buggies Unlimited today.
1982 to 1996 is right hand threads counter clockwise rotation engine... 1997 and up is left hand threads clockwise rotation engine.
james this is the bolt you would use 3/8 - 24 x 5-1/2 (LEFT-HAND THREADS)
Lefthand, that's why you have to order one when you shear off the old one and no brick-and-mortar stores anywhere on earth carry one lol.
have a John Deere gator TS and clutch bolt needs replaced and has fe290d engine with the reversed threads. the bolt measure 8M around approx 5 1/2" long
