MY CART (0)
Cart Subtotal:
It's time to step that golf cart of yours into the 21st century. We are tired of seeing you at the back of the pack, and we want to promote you to line leader with the Speed and Torque Motor Controller Conversion System. This aftermarket kit will work for Club Car DS 48-volt IQ systems with the rocker style F/R switch. It is also compatible with the Precedent 48-volt system and is recommended for lifted and non-lifted carts. The unit is ideal for anyone looking for an increase in speed and torque over the stock system of up to 25 mph.
With this kit, you will get an AMD Speed and Torque Motor that will allow you to get that high top end you are looking for. It also includes a Curtis high amperage controller that is mapped to the throttle of that Club Car. You need a high amperage solenoid with the bracket and diode, so we go ahead and include it. You will get a set of 4-gauge complete cables and complete step-by-step instructions. What are you waiting for? Call Buggies Unlimited now.
Mike thank you for the question yes this will fit without any major modifications
Call buggies and ask for tech support they will email them to you
The few times I called tech they were very friendly and helpful
Hope this helps good luck
Yes, this kit will work for your Precedent cart.
I’m no expert but I installed this kit on my club car and it negates your speed code and goes as fast as it is advertising , which it depends on your tire size etc. this kit will not get you to 30-35 mph .
Yes it will, I installed the same system on my 2006 DS and am getting a solid 30mph with 6 12 volt Trojans. You will have to do drilling of four new hole for the controller but that's it as far as fabrication goes.
this 7979 kit will work great for what your looking for
No unfortunately it does not But it does bring your cart to life
Hi Gene, the HP is in fact the 7hp at 5106 RPM.
Hi Joel, you have a 2000.5 DS cart. Call our sales department so we can find the correct kit for you, it depends on the FR switch and a few other components.
Hi Ron, the stock HP on the stock motor is about 3.3 and this kit takes it up to around 5.5 HP.