Club Car-Yamaha-EZGO - 12 Pack Cooler with Rear Fender Mounting Bracket
Review:
MY CART (0)
Cart Subtotal:
There is nothing worse than having a bad day on the links. You work all week, and the small solace you get on the weekends can quickly become why you have a mental breakdown. Having a 12-Pack Cooler with a Rear Fender Mounting Basket hanging off the side of your golf cart could be the saving grace that turns your game around. One lousy drive leads to a precarious second shot. If your golf game is anything like ours, the third swing will leave you in the sand, and then a three-putt to finish will leave you more than frustrated.
Walking back to your coach and forcefully placing your clubs back in the bag will only take away so much of the tension. But grabbing an ice-cold soda will melt the rest of it away. Not to mention you now have a way to bribe the other members of your foursome. Need an extra mulligan? You need to present a refreshing option on a hot day, and you are as good as gold. Do not try and use this option too often, however. They may catch on to your tricks. You cannot have too much of a good thing, right?
This golf cart cooler will fit on Club car, EZGO, and Yamaha models. It can hold up to a dozen 12-oz cans with ice, and the mounting hardware is included. Just give us a Call here at Buggies Unlimited today and get this kit ordered and coming your way.
John thanks for the question. this could work. It just needs a flat mounting space to put a few holes in to bolt the mount down.
Holes in new bracket are 4 1/2" front to back and 4" side to side. You may be able to use one existing hole and drill 3 new holes to match holes in new bracket. I had to remove the inner fender skirt to mount the bracket. Not too difficult. Should be doable. Very happy with the Cooler,bracket and hardware.
Do not know the configuration of a Yamaha; but suggest take cooler measurements and examine the mounting location. Mine is mounted on the rear platform of a very early medal Tee Bird cart. The cooler is very satisfactory.
I'm not sure but believe it will fit. The bracket is 10" wide x 13.5" long. Holea are 4" apart across x 4.5" apart front to back. I removed inner fender skirt to drill holes and mount bracket. Quite easy. Good quality bracket and cooler.
Its not specifically for that model, but where there is a will there is a way! Just make sure you like it before you drill any holes!
If you intend to mount this on the passenger side, you want to order Item #30944P - not this one. The price, for some reason, is about $12 more for the right side mount.
I bought for a EZ Go but would also fit Club.Car. Would seem pretty universal.
The wire cage that holds the cooler is 14" wide and 10" deep (and the cooler is 9.5" high) and for the cooler to be level the cage needs to mount on a flat surface. It might be possible to add shims on one side of the mounting holes if the mounting surface is not level (flat). I put this on my electric golf scooter and it works great.
Have club car, I mounted mine on fender with stainless bolts and lock nuts, tight squeeze. Moved the sand holder up on the roof post facing out so when I do have my winter cover on can reach it through door opening
Live in Las Vegas so a rain hood is not part of our equipment
I installed the cooler on my 2001 club car DS and it fit well and functions as advertised. Installation was straightforward. I covered the area on the rear fender with blue tape, marked for the four holes, drilled holes then removed the tape. The bolts and spacers were included .
