Home : Clutch Puller for 1988 & Up Club Car DS and 2004 & Up Precedent Models
Clutch Puller for 1988 & Up Club Car DS and 2004 & Up Precedent Models
Review:
It's a necessity for gas golf cart owners! When you do any work involving the engine of your gas golf cart, you usually have to remove the clutch. Because clutches are press-fitted, attempting to take them off can be damaging if not done with the proper tools. Use a clutch puller to easily snap them off and prevent costly repairs. Fits Club Car 1988 and up gas models.
IMPORTANT TECH-TIP:
This bolt withstands 45' LB of torque, which for a hollow 7/16" X 20 bolt is very good. Please be aware that a high impact wrench cannot be used on this tool. In tests we found that when upwards of 60 foot pounds was applied, the tool did break so its best to stay under the recommended torque.
Also, be sure to add grease on the end of the tool so it fills the gap between the crankshaft hole and tool point. Remember, you cannot compress a liquid.
IMPORTANT TECH-TIP:
This bolt withstands 45' LB of torque, which for a hollow 7/16" X 20 bolt is very good. Please be aware that a high impact wrench cannot be used on this tool. In tests we found that when upwards of 60 foot pounds was applied, the tool did break so its best to stay under the recommended torque.
Also, be sure to add grease on the end of the tool so it fills the gap between the crankshaft hole and tool point. Remember, you cannot compress a liquid.
